10 mm
The 10 mm disc is the most economical choice for single units and short bridges. It has the lowest cost per blank and nests efficiently when most of your cases are crowns.
TT One Pre Shaded
TT One Pre Shaded
Regular price
$70.00
Sale price
$70.00
Regular price
UPCERA’S TT-ONE zirconia is one of the world’s most popular systems. TT-One Pre-Shaded zirconia is infinitely versatile to fit your needs.
Hurry up, only 10 items left in stock.
Upcera TT One Pre-Shaded Zirconia
TT One Pre-Shaded Zirconia is Upcera’s 4Y-PSZ disc, shaded throughout. There is no gradient and no layering. Whatever shade you order that shade runs top to bottom, edge to edge.
Flexural strength sits at 1000 MPa. Translucency holds at 47% throughout the blank. The recommended sintering temperature is 1480 degrees Celsius.
Uniform shading makes nesting easier. With a layered disc, each unit has to be lined up with the gradient, which wastes material. Here, you can rotate and tilt units however you like and pack them closely, while the shade stays consistent. On a busy mill, that can mean getting nine crowns from a disc instead of six.
Built for Strength, Shade Consistency and Fast Turnaround
Labs run TT One Pre-Shaded for one reason: it removes decisions. No dipping, no drying, no orientation check before you hit send.
1000 MPa flexural strength, enough for anterior and posterior
47% translucency, which reads natural without going glassy
Shade is identical at every point in the disc
Pre-shaded in 16 VITA classical shades plus BL1 to BL4
Fine grain structure that mills clean and polishes well
4Y-PSZ sits in the middle of the range on purpose. You give up some of the raw strength of a 3Y disc and some of the light transmission of a 5Y, but you get one material that handles almost everything that comes through the door.
UPCERA
TT One Pre-Shaded Zirconia Discs: Specs and Technical Highlights
| Specification | Detail |
|---|---|
| Material | 4Y-PSZ, pre-shaded throughout |
| Flexural strength | 1000 MPa |
| Translucency | 47% |
| Shades | 16 VITA classical plus BL1 to BL4 |
| Diameter | 98 mm |
| Thickness | 10 mm |
| Sintering temperature | 1480 degrees Celsius |
| Finishing | Standard stain and glaze systems |
These TT One pre-shaded zirconia discs run in open-architecture CAD/CAM systems and handle both conventional and speed sintering programs. Keep the 1480-degree recommendation: under firing a 4Y disc leaves it chalky; overfiring increases grain growth and shifts the shade.
TT One Pre-Shaded Zirconia: Applications and Indications
Most labs stock TT One pre-shaded zirconia for bridges and single crowns; 1000 MPa covers both, eliminating the need for a second disc.
Single crowns, anterior and posterior
Two- and three-unit bridges in either arch
Implant-supported single crowns
Monolithic full-contour restorations
Cutbacks for layering porcelain over a shaded core
For long-span posterior bridges and full-arch hybrids, choose Upcera Explore Functional (1027–1300 MPa). For a natural shade transition in the smile zone, TT One Multilayer offers the same 4Y chemistry with a built-in gradient.
Thickness guide
TT One Pre-Shaded Dental Blocks in Every Thickness
12 mm and 14 mm
for standard crown and bridge production
16 mm and 18 mm
for deeper preparations and taller units
20 mm and 22 mm
for longer spans
25 mm and 30 mm
for full-arch frameworks
Why Buy TT One Pre-Shaded Zirconia from Zirconia Guys
Zirconia Guys ships Upcera discs to labs across the US from Iselin, New Jersey.
Genuine Upcera stock, never grey-market or repackaged
All 20 shades on the shelf, so a shade match never holds up a case
Fast domestic shipping, with better pricing at volume
Full Upcera range in one place, including TT One Multilayer, ST and Explore
Buy TT One pre-shaded zirconia online or call +1 732 664 6644 to open a lab account.
Frequently Asked Questions
Is TT One Pre-Shaded multilayer disc?
Is TT One Pre-Shaded multilayer disc?
No, this is the most common TT One mix-up: Pre-Shaded has a uniform shade, while TT One Multilayer has a chroma gradient. Both use 4Y-PSZ and reach 1000 MPa; the difference is their shade structure.
Does nesting orientation matter?
Does nesting orientation matter?
No, and that is the main practical advantage. Rotate units in any way the software fits them. Nothing about the shade changes. Layered discs do not give you that freedom.
What sintering temperature does it need?
What sintering temperature does it need?
Upcera recommends 1480°C and supports speed cycles. Follow its published furnace program, not a 5Y disc cycle, which fires 30°C lower.
Is 1000 MPa enough for posterior bridges?
Is 1000 MPa enough for posterior bridges?
For two- and three-unit spans, yes. Beyond that, the connector cross-section starts doing more work than the material and Explore Functional at 1027 to 1300 MPa is the safer call.
Do I still need to stain and glaze?
Do I still need to stain and glaze?
Glazing, yes. Staining is optional. The base shade is accurate enough to ship on straightforward cases, though most technicians add light incisal characterization on anterior.
